Detailed description

      An important step in the cold storage needs to be built according to the cold storage process. The installation of the different condensers is different, but the overall rule is to be placed close to the oil separator and the liquid reservoir. Pressure gauges and safety valves must be installed on the condenser. Of course, different condensers have different requirements for layout. Let's take a look together.

   1. The horizontal condenser
          horizontal condenser can not be installed in the open space, and must be installed in the equipment room of the cold storage. In order to save the floor space, the condenser and the liquid storage device can be arranged on the upper and lower layers. When installing the condenser, leave a space for cleaning and replacing the pipe at one end, and there is room for lifting the end cover above the two ends.
 
 

2. The pouring
          condenser is installed on the outside. It can be installed in the ventilation outside the machine room or on the roof of the machine room. If it is in a windy place, the windshield should be installed around the condenser. It is protected.
 

3, vertical condenser
          vertical condenser and shower-type condenser should also be installed outside the machine room, and to avoid direct sunlight. The pool wall of the condenser should be spaced 3 m from the wall to reduce damage to the wall caused by splashing water.

Prev：none!

Next：Multi-effect falling film evaporator